The most popular products
Fakhr Sina radiography dental unit model pegah2505/22
- Complete Pegah unit (5 hoses)
- RADIOGRAPHY MOUNTABLE
- Equipped with a speed control gauge
- Has 5 hoses
- Can be installed on the ground
- Seat electric motors: Hanning, Germany, 2015
- American hoses
- 5 Italian electric valves
- Electronic components from Germany, Japan, Korea and Taiwan
- Made in Iran
- 2 years warranty
Phosphor plate
Acteon Imaging Plates, designed for use with the PSPIX 2 scanner, are available in various sizes (0, 1, 2, and 3), with Size 1 measuring 24 x 40mm and Size 2 measuring 31 x 41mm
These plates are known for their flexibility and thinness, offering patient comfort, and are compatible with both MAC and Windows operating systems
Size 0: 22 x 35 mm
Size 1: 24 x 40 mm
Size 2: 31 x 41 mm
Size 3: 27 x 54 mm
Size 4: 52 x 54 mm (constructed from two Size 3 plates)
:Key Features
Flexibility and Thinness: The plates are designed to be flexible and thin, enhancing patient comfort during intraoral imaging
· Image Quality: The PSPIX 2 scanner, along with the imaging plates, provides sharp and contrasted images for reliable clinical diagnosis
Ease of Use: The scanner automatically detects the plate size and optimizes the image, streamlining the workflow
Hygiene: The plates are designed to be used with hygiene bags for protection and are compatible with disinfection protocols
Software: The PSPIX 2 comes with Sopro Imaging software, compatible with both MAC and Windows, offering tools for image editing, exporting, and archiving
Scan Times: Fast mode: 1.6-2.7 seconds, High definition mode: 2.1-3.6 seconds
Resolution: 20 lp/mm
PSPIX2 model Acteon phosphor plate
Acteon Group
Acteon Group is a French Medtech Company Specialized in High Technology Dental And Medical Devices. At ACTEON strive every day to create new mini-invasive technologies in surgery, in X-Ray emission, in imaging and make them available to us with an intuitive digital connectivity.
Less invasive surgery creates more trust from your patients
Less X-Ray is more safety for everyone in your practice
Less compromise in image quality leads to better information ready to be analyzed by you
Less complexity provides the ability to create fruitful dialogue with your patients
ACTEON employs highly trained technical and sales teams based in 29 different offices around the world and has a distribution network that covers our markets in 94 additional countries
The advanced technology used inside this scanner marks a turning point in terms of excellence. The new PSPIX² is as much as three times smaller than other imaging plate scanners, making it the most compact system on the market!
With little space required due its size, dentists can now put a PSPIX² next to each operating chair to improve their workflow and productivity. With the scanner next to him, there is no longer a need to move to another room to scan the imaging plate. An exceptional, high quality, sharp image can be obtained within a few seconds, allowing a clinical diagnosis to be made very quickly. Moreover, the color backlight and the icons on the touchscreen provide guidance, making it highly intuitive. Featuring the exclusive “Click & Scan” concept, the PSPIX² is also designed for multi-use and can be shared by up to ten workstations at any one time!
Finally, the PSPIX² is the only scanner on the market with optional removable parts that can be sterilized in an autoclave to give maximum protection. The removable parts provided with each purchase comply with dental washer disinfector. The PSPIX² exceeds dentists’ expectations in terms of hygiene. The PSPIX² is fully compatible with both MAC and Windows interfaces to fulfill all the surgery’s needs.
:Data sheet
Company/ Brand :Acteon
Country :France
Weight :2.6Kg
Power :AC100~240V
Unit Size :154×204×193mm
Resolution: 20lp/mm
Scan Time :Fast mode: 1.6-2.7s | High definition mode: 2.1-3.6s
X-MIND TRIUM Pan Ceph 3D jaw and face imaging device
The X-Mind Trium Pan Ceph 3D is a versatile dental imaging system that combines panoramic, cephalometric, and 3D CBCT capabilities
It features a high-frequency DC generator, a CMOS detector, and a range of acquisition programs for various dental and maxillofacial diagnostics
The system offers multiple field-of-view (FOV) options, including 40x40mm, 60x60mm, 80x80mm, and 110x80mm, allowing for focused or comprehensive imaging of specific areas or the entire dentition
:Key Specifications
X-ray Source: High-frequency DC generator, 60-85 kVp, 4-10 mA
· Detector: CMOS, with pixel size of 100 μm and various FOV options
:Acquisition
Single scan technique, exposure time ranging from 4 to 16.8 seconds, and reconstruction time from 3 to 2 seconds
· Image Format: JPEG, BMP, PNG, TIFF, and DICOM 3.0
· Mechanical Data: Maximum footprint of L 150 x W 172 cm, height up to 235 cm, and weight of 215 kg for the Pan-Ceph configuration
· IEC: Class I, Type B
:Features
:3D CBCT
Provides volumetric data for detailed analysis of teeth, jaws, and surrounding structures
Panoramic Imaging
Generates 2D panoramic images of the entire dentition, jaws, and TMJ
:Cephalometric Imaging
Enables cephalometric analysis for orthodontic and maxillofacial assessments
:Metallic Artifact Reduction
Includes a filter to minimize artifacts caused by metallic restorations, improving image clarity
:Multiple FOV Options
Offers a range of FOVs (40x40mm, 60x60mm, 80x80mm, 110x80mm) for various diagnostic needs
:Upgradeable
The system can be upgraded from a 2D panoramic unit to a 3D CBCT or cephalometric unit, providing flexibility as the practice grows
:Workstation
Comes with a pre-installed workstation PC, including Acteon Imaging Suite software and multiple licenses for 3D visualization and implant planning
AC Wall-mount/ Unit-mount X-Ray machine
X Genus AC is functionally simple in design but at the same time is extremely sophisticated in features and benefits providing a single phase and a high frequency system in one
A system which sets a new standard in quality and safety. It has been engineered to work a high frequency mode
it's simple, intuitive anatomical controls assure perfect x-ray radiographic results with any patient and technique. its simplicity of use provides the radiological operator with complete control and a significant savings of time and money
:Data sheet
Company/ Brand DE Gotzen
Country :Italy
Model :Mobile
Weight :23kg
Generator :AC High Frequency
Tube Voltage :70kV
Tube Current :8mA
Focal Spot Size :0.7mm
Exposure Time : 0.08-3.2Sec
Power : AC100~240V
Remote controller :Yes
T-2 Dry Compressor
Technical Data |
without membrane-drying unit |
with membrane-drying unit |
Voltage (V 1∼) | 230 | 230 |
Frequency (Hz) | 50/60 | 50/60 |
Cylinder | 2 | 2 |
Flow rate at 5 bar1) (l/min)2) | 125 | 125 |
Tank capacity (l) | 20 | 20 |
Pressure range 3) (bar) | 6 - 7,8 | 6 - 7,8 |
Noise level 4) at 5 bar db(A) | 68 | 68 |
Noise level in the cabinet db(A) | 56 | 56 |
Dimensions (H x W x D cm) | 64 x 48 x 37 | 64 x 49 x 43 |
Weight (kg) | 38 |
43 |
The discharge flow without dry air - Power bandwidth results from the mains frequency 50/60 Hz - A pressure reducer is available as an optio - Average values at 5 bar -
Tornado 2 – Super Silent
Tornado 2 - Super Silent
The Tornado is one of the quietest compressors in dentistry, yet it is still very powerful. The highly developed compressor set is extremely quiet, and can have a calming effect on both patient and practitioner.
Features:
Oil-free, dry, hygienic, taste and odourless compressed air
Very reliable thanks to the closed crankcase
Extremely low-noise
Plug ‘n’ play installation – place, plug in, ready
Specification:
Voltage: 230V
Frequency: 50/60Hz
Cylinder: 2
Flow rate at 5 bar (1/min): 125
Tank capacity: 20L
Pressure range (bar): 6-7, 8
Noise level: 68dB
Dimensions (with membrane-drying unit): H64 x W49 x D43
Weight (with membrane-drying unit): 43kg
The discharge flow without dry air- Power bandwidth results from the mains frequency 50/60 Hz- A pressure reducer is available as an option-
Average values at 5 bar-
T-1 Low Noise 20L Dry
Tornado 1 20L DRY- Super Silent
The Tornado is one of the quietest compressors in dentistry, yet it is still very powerful. The highly developed compressor set is extremely quiet, and can have a calming effect on both patient and practitioner.
Features:
- Oil-free, dry, hygienic, taste and odourless compressed air
- Very reliable thanks to the closed crankcase
- Extremely low-noise
- Plug ‘n’ play installation – place, plug in, ready
Specification:
- Voltage: 230V
- Frequency: 50/60Hz
- Cylinder: 1
- Flow rate at 5 bar (1/min): 67
- Tank capacity: 20L
- Pressure range (bar): 6-7, 8
- Noise level: 64dB
- Dimensions (with membrane-drying unit): H66 x W49 x D43
- Weight (with membrane-drying unit): 37kg
T-1 Low Noise 20L
Tornado 1 20L - Super Silent
The Tornado is one of the quietest compressors in dentistry, yet it is still very powerful. The highly developed compressor set is extremely quiet, and can have a calming effect on both patient and practitioner.
Features:
- Oil-free, dry, hygienic, taste and odourless compressed air
- Very reliable thanks to the closed crankcase
- Extremely low-noise
- Plug ‘n’ play installation – place, plug in, ready
Specification:
- Voltage: 230V
- Frequency: 50/60Hz
- Cylinder: 1
- Flow rate at 5 bar (1/min): 67
- Tank capacity: 20L
- Pressure range (bar): 6-7, 8
- Noise level: 64dB
- Dimensions (with membrane-drying unit): H66 x W49 x D43
- Weight (with membrane-drying unit): 37kg
V9000 Suction
Group with 3 suction machines incl. control unit with vacuum controller and bacteria filter, remote monitoring possible. For up to 50 workplaces with max. 30 operators at the same time.
Technical data | V 9000 |
Voltage (V 3~) | 400 |
Frequency (Hz) | 50 / 60 |
Electrical power (kW) | 8,2 / 10,9 |
Current consumption (A) | 16,6 / 19,6 |
Dimensions (H x W x D cm) | 115 x 130 x 130 |
Space requirements (H x W x D cm) | 115 x 230 x 230 |
Weight (kg) | 215 |
Vacuum (mbar) | 160 |
Noise level dB(A) | 75 without housing, 66 with housing |
Suction exhaust air connection (mm) | 110/110 (DN 100) |
V6000 Suction
Group with 2 suction machines incl. control unit with vacuum controller and bacteria filter, remote monitoring possible. For up to 30 workplaces with max. 20 operators at the same time.
Technical data | V 6000 |
Voltage (V 3~) | 400 |
Frequency (Hz) | 50 / 60 |
Electrical power (kW) | 5,6 / 7.4 |
Current consumption (A) | 12,1 / 14,1 |
Dimensions (H x W x D cm) | 115 x 130 x 130 |
Space requirements (H x W x D cm) | 115 x 230 x 230 |
Weight (kg) | 175 |
Vacuum (mbar) | 160 |
Noise level dB(A) | 73 without housing, 64 with housing |
Suction exhaust air connection (mm) | 110/110 (DN 100) |
V600 Suction
The dry suction unit V600 (DÜRR DENTAL) is designed to be attached to dental units with a built-in separator, designed for aspiration of liquid and solid particles from the oral cavity Designed for simultaneous operation of 2 dental units. It can be connected to 3 dental units, provided the factor of simultaneous operation is not more than 60%
Equipped with a control module, which turns on the device when the 24 AC voltage is supplied from the dental unit
Suction Systems for dental surgeries – perfect suction power from Durr Dental
Powerful dry suction unit
In the case of dry air suction system, the separation function is integrated into the treatment units. Only dry air reaches the V Suction Unit.
Technical data
Voltage: 230V
Frequency: 50/60 Hz
Current consumption: 5 A
Power: 1.1 kW
Speed: 2,850 rpm
Vacuum without AAV (Auxiliary air valve) : 170 mbar
Noise level: approx. 63 dB(A)
Dimensions: H50 x W42 x D41 cm
Weight: 23 kg
V250 Suction
Tyscor V 2 radial suction unit
We invented aspiration. Once again. In 1964, Dürr Dental developed a new suction system that allowed patients to be treated in a supine position for the first time. Back then it was a sensation, now we take it for granted. But it’s far from the end of our quest to continue to be the 'Best in Class', or rather to be the 'Best in Class' again and again.
The Tyscor VS 2, the first dry aspiration system with radial compressor in the field of dentistry, sets new standards in performance and efficiency. Naturally, 100 % made in Germany (at Bietigheim-Bissingen) for 100 % reliability.
More than 50 percent less weight and up to 50 percent saving of energy.* Radially brilliant! The intelligent control allows also operation with two Tyscor suction machines connected to only one suction line – for perfect operational reliability.
Voltage (V): 220 -
Frequency (Hz): 50 / 60 -
Revolutions/min (rpm): 2850 -
Vacuum level (mbar): 170 -
Network compatible -
Weight (Kg): 10 -
Noise level (dB(A)): 58 -
Power (W): 420 -
Hygoclave 50 Autoclave
The Hygoclave 50 is a benchtop, front-loading, automatic dental autoclave manufactured by Dürr Dental. It is a Class B sterilizer with a 17-liter chamber and is designed for efficient and user-friendly sterilization of dental instruments
:Key Specifications
Type: Class B, benchtop, front-loading, automatic autoclave
· Chamber Volume: 17 liters (4.49 gallons)
· Chamber Material: Stainless steel
· Dimensions: 493 x 484 x 642 mm (width x height x depth)
· Weight: 57 kg (empty)
· Supply Voltage: 220 V-60 Hz, 230 V-50/60 Hz, or 240 V-50 Hz
· Maximum Current Consumption (at 230V): 8.9 A
· Maximum Power Consumption (at 230V): 2050 W
· Fresh Water Container: 5.2 liters
· Sterilization Programs: Includes 134°C B Standard, 134°C B Standard Plus, 134°C B Prions, 134°C B Flash, and 121°C B Standard
· Standards: EN 13060, EN 61010-1, EN 61326, EN 61010-2-40
· User Interface: Features a high-resolution 5" touch screen with intuitive, color-coded icons for easy operation
Connectivity: Can be connected to practice networks and documentation software for data logging and monitoring
Safety Features: Includes automatic door locking, integrated water quality testing, and a universal program for complex hollow bodies
:Maximum Load
Unpackaged, bulky load (Type B): 5.5 kg
Packaged, bulky load (Type B): 3.5 kg
Porous load (Type B): 1.5 kg
Packaged, bulky load (B Flash): 0.5 kg
Porous load (B Flash): 0.2 kg
Hygoclave 50 |
Hygoclave 50 Plus |
|
Maximum Load for standard Cycles Type B | ||
Unpackaged, bulky load | 5,5 kg | 6.5 kg |
Packaged, bulky load | 3.5 kg | 4 kg |
Porous load | 1.5 kg | 2 kg |
Maximum load for B flash cycle | ||
Packaged, bulky load | 0.5 kg | 0.7 kg |
Porous load | 0.2 kg | 0.3 kg |
Cycle times | ||
134°C B Standard (hold time 5.5 min) | 37 | 38 |
134°C B Standard Plus (hold time 5.5 min) | 38 | 39 |
134°C B Prions (hold time 20 min) | 49 | 50 |
134°C B Flash (hold time 5.5 min) | 26 | 27 |
121°C B Standard (hold time 20.5 min) | 56 | 56 |
Instrument Mini Wash
Surgical instruments washer, specially designed for washing at 65°C all the instruments. Reduces bacterial, accelerates and simplifies the cleaning before sterilization
-Width 575 x depth 490 x H 465 mm
-Net weight: 25 kg
:Data sheet
Company/ Brand:Reverberi
Country:Italy
Weight:27 Kg
Unit Size:575 x 490 x 465 mm
Produced Sound:dB(A)55
SERENA B23 Autoclave
Printer included
Device in accordance with the European Directive UNI EN 13060: 2010-
Capacity of sterilization chamber 18/23 lt-
Two sterilization temperatures: 121 ° C or 134 ° C-
Possibility of two programmable "special cycles"-
3 Universal sterilization cycles type B-
3 Test Cycles: 1) Vacuum test 2) Bowie & Dick test / Helix test 3) Spore test-
Prion Cycle, Night Cycle-
Delayed start of the cycle-
Motorized closing of the door-
Display for viewing operations with date and time and counting cycles-
Vacuum pump drying-
Additional drying at the end of the cycle-
Parameterization of the operator code-
Automatic water loading by the pump-
Sterilization Cycle Recording on Integrated SD Card-
Fractional vacuum-
Possibility of automatic filling via connection with Kiara - Tec water purifier-
Predisposition for connection to the printer-
Predisposition for connection to the labeler-
Possibility of connection to the computer-
PRATIKA B20 Autoclave
Able to convert from Type S to Type B sterilizing at the touch of a button, the Siltex Pratika has been designed to combine all the benefits of a Class B sterilizer with the convenience of choice. It has pre-vacuum and post-vacuum for more efficient sterilizing and drying, fully programmable sterilizing and drying cycles, a Bowie-Dick test cycle, vacuum test cycle and clean and waste water tanks
:Technical specs
Pre-Programmed Cycle Lengths
Unit dimensions: 45 x 39 x 58cm (w x h x d)
Unit weight: 45kg
Chamber capacity: 20 Litre - 24cm diameter, 43cm length
5 litre external dump tank
240V, 10A power outlet required
:Features
Type B or Type S sterilizing
20 litre chamber
121ºC or 134ºC sterilizing cycles
Closed door drying cycle
Digital temperature readout
User selectable cycle lengths
Printer option available
Thermal cut-out safety switches
External waste water dump tank7 litre chamber
inbuilt SD card for electronic backup
SD card reader
Accessories
Sterilizer comes with circular rack system and 4 trays, tray handle, 2 wire racks, dump tank and technical manual. Printers require one additional power point, and connect directly to the sterilizer
After sales phone
00982166804496
Sales Department
00982166912352
Working Hours
Thursdays: 9Am-14Pm
Fakhrsina
All rights are reserved for FakhrSina Company
1403-2024
E-mail : info@fakhrsina.ir